Nomado Apps

Nomado Apps / Blog / How to sync multicam wedding video and lav audio by sound

How to sync multicam wedding video and lav audio by sound

A ceremony shot on several cameras with lav recorders on the couple and the celebrant has to be lined up before any editing starts. Syncing by sound is the most reliable way, as long as you check the matches it is unsure about.

A couple holding hands on a mountain ridge near Wānaka, New Zealand, with a helicopter parked behind them and snowy peaks in the distance

Why sync by sound

Every camera and recorder at a ceremony hears the same moments: the celebrant's first words, laughter, a clap, the first kiss. Syncing by sound compares those shared moments and works out how far each clip is offset from the others. It needs no slate and no timecode, which suits wedding days where cameras start and stop many times.

There is one more thing to deal with. Separate devices run on their own clocks, so over a long ceremony a recorder can drift a little ahead of or behind a camera. A good sync measures that drift as well as the starting offset.

Set up on the day so sync is easy later

  • Record scratch audio on every camera, even ones whose sound you will never use. Without sound, a clip cannot be synced by sound.
  • Start the lav recorders before the ceremony begins and let them run through to the end. One long file is easier than many short ones.
  • Keep a separate ambient recorder near the front if you can. It hears both the lavs' talkers and the room, which helps link clips together.
  • If you stop and start a camera, keep it recording through the key moments so each clip overlaps the recorders.
  • Copy cards to a drive before you build the edit. Timelines link to the files, so they should not live on a card.

Syncing the ceremony step by step

If your clips are still on a memory card, SyncMaster offers to copy them to a folder first and verifies every copy before switching the session to it. Your original clips are never changed.

  1. Drop every clip from the ceremony into SyncMaster: camera files, recorder files and whole card folders all work.
  2. SyncMaster reads the sound of each clip and syncs them automatically. Each clip gets a badge: Reference, Synced with a confidence, Check for a weak or disputed match, or Not synced.
  3. The longest video clip is the reference by default. Choose Use as Reference if another clip suits better, such as your main wide camera.
  4. Review every clip marked Check, then export a timeline for Final Cut Pro, Premiere Pro or DaVinci Resolve.

Checking weak matches

Most clips sync cleanly. The ones to look at are short clips, clips with very little shared sound, and clips recorded far away from the action, such as a phone at the back of the room. These are the clips a sync tool is least sure about.

  1. Press Command G to jump to the next clip marked Check.
  2. Look at its waveform laid over the reference around the loudest shared moment. Peaks such as a laugh or a clap should line up.
  3. Press Space to hear both together where the exported timeline will put the clip. An echo or a flam means it is off.
  4. Nudge by frames with Command [ and Command ], or by 10 frames with Option added. Undo works if you go too far.
  5. Remove a clip that has no real overlap with anything else rather than forcing it into place.

A clip placed by a single weak match must be confirmed by a second consistent match before SyncMaster counts it as synced. Exported timelines mark weak matches, with a Check sync marker in Final Cut Pro and a label in Premiere Pro, so you can find them again in the edit.

Loudness targets for the vows and speeches

Loudness is measured in LUFS (LKFS in some standards, the same scale). Platforms and broadcasters ask for different targets, so choose the one that matches where the film will be watched. The values below are the presets in SyncMaster's Master Audio.

  • Choose Speech for vows and speeches. It aims the loudness of the speech itself at the target, so applause, laughter or a band do not pull the voices down.
  • Choose Music for a mix where music is the main content.
  • Every preset uses a true peak limiter at −1 dBTP, which keeps peaks safely below full scale.
  • The mastered audio is a 24 bit 48 kHz WAV written next to the timeline, already lined up with the cameras.
PresetTargetUse
Web and YouTube−14 LUFSOnline delivery, client films and social media
Podcast−16 LUFSSpoken audio and podcasts
Broadcast EBU R128−23 LUFSBroadcast delivery that follows EBU R128
Broadcast Japan ARIB TR-B32−24 LKFSBroadcast delivery in Japan

Syncing and export are the solid parts of SyncMaster. The automatic mix of several microphones is still being tuned, so listen through any mix of two lavs and an ambient recorder before delivery.

Questions

How do you sync multiple cameras and audio recorders without timecode?

Sync them by sound. Every device records the same moments, such as speech, laughter and claps, and software compares those shared sounds to work out each clip's offset. Each camera needs to record some scratch audio for this to work.

Why does my lav recorder drift out of sync with the camera?

Every camera and recorder has its own internal clock, and no two run at exactly the same speed. Over a long ceremony the small difference adds up, so audio that lines up at the start can be slightly off at the end. A sync tool that measures drift corrects for it.

What loudness should a wedding film be for YouTube or the web?

A common target for online video is −14 LUFS integrated with a true peak no higher than −1 dBTP. Broadcast uses lower targets, such as −23 LUFS for EBU R128 and −24 LKFS for ARIB TR-B32 in Japan.

What should I do with clips marked as a weak sync match?

Check them before you edit. Compare the waveforms around a loud shared moment, play both together to listen for an echo, and nudge by frames if needed. Remove any clip that has no real overlap with the others.

Which editors can open a SyncMaster timeline?

SyncMaster exports timelines for Final Cut Pro, Premiere Pro and DaVinci Resolve. With Master Audio on, it also writes a 24 bit 48 kHz WAV next to the timeline file.

Join the waitlist

The apps are in private beta while we finish signing them with Apple. Leave your email and we'll tell you the day they go on sale. No other emails.

Which apps interest you? (optional)